- Metallurgical Facilities
- Gas Industry
- Oil Industry
- Chemical Industry
- Power generating
- Metallurgical Industry
- Electrically-Driven Equipment of the Sintering Stage
This group includes compressors purposed to induce air draft through the sinter cake (burden) fused by means of the sintering machine and to remove thus generated agglomeration gases during dry and wet gas cleaning.
- Electrically-Driven Equipment of the Basic Oxygen Steelmaking (BOS) Stage
This group includes compressors purposed to remove oxygen-converter gases from various BOS converter capacities after wet
cleaning of the gases.
- Turbocompressor units with the Steam-Turbine Driven Centrifugal Compressors
Turbo-сompressor units for air supply to blast furnaces (TCU) are technologically advanced products from the point of view of production capacities and technologies. These TCU are stationary, with a long service life, good maintainability.
- Centrifugal Compressors for the Blast Furnaces
The group of the centrifugal compressors for the blast furnaces includes the following machine series: K5500-41-1, K5500-42-1, K550-41-1M, K 3250-41-2, K 3250-42-1.
- Axial Compressors for the Blast Furnaces
The group of the compressors for the blast furnaces includes three machine series: K-3750-1, K-4300-1, K-4950-1, having a volumetric capacity of 3750–4950 m³/ min. at the final air pressure 0.46–0.54 MPa.
- Top-pressure recovery turbines (TPRT)
Top-pressure recovery turbines (TPRT) operating on the blast-furnace top gas are designed to generate electric power at the expense of pressure differential between the gas pressure under the blastfurnace top and pressure in the all-factory top gas reservoir from which gas comes to the consumer.
- General- and Special-Purpose Air Centrifugal Compressors
Centrifugal compressors for the oxygen separation units.
The compressor equipment of REP Holding is supplied to large steel plants and enterprises of Russia, CIS countries and far abroad, among which there are Magnitogorsk Iron and Steel Works, Novolipetsk MK (Iron and Steel Works), Nizhniy Tagil MK, MK “ Severstal”, enterprises of GK “Mechel”, “EVRAZ”, “Kazakhmys” Corporation» (Kazakhstan), “Metinvest” Group (Ukraine), Bokaro Steel PLant, Bhilai Steel Plant, Durgapur Steel Plant (India), "Paksteel" (Pakistan), Baotou Iron & Steel (Group) company (China), etc..
For the metallurgical sector “REP Holding” manufactures the electrically-driven units and the Turbocompressor units for the various applications. Using the modern technical solutions, the Holding manufactures and supplies both the packaged units, and their spares. This helps to provide reliable operation of the equipment, lower cost of the basic equipment, and smaller delivery periods. Also this allows to carry out a complex service maintenance of the unit in the field.