- Mosaic diagram
Service for displaying the mnemonic information of status and processes controlling in real-time basis.
- Full-scale simulator for NPP
Is designed for professional joint training of the operating personnel of the modular control station (MCS) and backup control station (BCS) of the NPP.
- Automatic control systems (ACS TP)
The creation of the automatic control systems includes: draft design investigations at a site; development of Technical Assignments for creation of ACS taking into account individual requirements of Purchaser.
- The Low-voltage package module
The Low-voltage package modules are intended for receiving and distribution of electric power between auxiliaries consumers at the heat electric generation plant, regional power station and NPP, industrial enterprises and etc.
- Factory-assembled switchgear
Factory-assembled switchgear is designed for accepting and distribution of electrical power of threephase AC current at a frequency of 50 & 60 Hz to rated voltage of 6,10 and 35 kV.
- The package transformer substations with the power 25-2500 kV (6(10)/0,4 rV)
It is intended for reception, converting and distribution of the electric power of the three-phase AC with the frequency 50Hz and voltage 0.4 kV.
- Containerized Constructs for Electrical Equipment
The Container Unit (CU) is designed to protect and provide functioning of various electrical equipment inside it intended for industrial and municipal applications, including transformer substations, switchgears, frequency converters, diesel-generators etc.
- The Low-voltage package modules SIVACON 8PT (6(10)/0,4 kV)
The Low-voltage package modules are intended for receiving and distribution of the electric energy of three phases AC with the frequency 50Hz for nominal voltage up to 690 V are used for all types of electric power plants and substations, for power supply of all industrial enterprises.
- The New Construct for Distribution Units and Power Boards of Low Voltage Control SIVACON S8
Saves space by a combination of different types of modules in a single cabinet;patented connection terminals and internal separation provides a simple separation of the functional compartments.
- Marine type LV electric switchboard equipment
The marine LV electric switchboard equipment is designed to receive the generated power, to distribute it among the vessel consumers and to protect the outgoing lines.
- Integrated control systems of the onboard technical equipment
The integrated control systems of the onboard equipment are designed to provide the centralized access to information and remote automatic control of the vessel technical equipment. The integrated control systems of the onboard equipment ensure interaction of the system with other control systems of the vessel.
- Substations of 110, 35, 6(10) kV
- Modular mobile substation (MMS) (110/35/10 kV)
MMS — mobile container (trailer, platform or pallet), in which one are arranged: power transformer module , HV and MV module.
- Containerized Automated Diesel Power Plants
The containerized power plants are designed to be used as a backup (emergency) or main power source.
- Modular Package Gas-Piston Power Plant of MPGPPP 0.4 (6, 10)-1500-У1 Type, 0,4; 6; 10 kV
The gas-piston power plant (GPPP) is designed for use as a primary or backup power supply of the customer’s consumers.
- The frequency converter ПЧТ-6-2600-В-01
It’s designed for utilization in structure of variable frequency drives;null-balance units.
- Gas turbine power stations based on gas turbines rated at 32 MW
Gas turbine electric power station GTEPS-32 of the single cycle is realized on the base gas turbine engine MS5002E, which was manufactured by “REP Holding” under the license of Oil&Gas Nuovo Pignone, Italy.
- Gas turbine power stations based on gas turbines rated at 22/25 MW
High-tech industrial gas turbine, produced and assembled in Russia on the production site of REP Holding – “Nevskiy Zavod” Plant under the license and in cooperation with Solar Turbines. It features the highest economical efficiency at a low level of harmful emissions for this power rating.
- Gas turbine power stations based on gas turbines rated at 16 MW
GTE-16 high-tech gas turbine power plant, simple cycle, based on T16 gas turbine engine developed by REP Holding together with GE Oil & Gas (Nuovo Pignone S.p.A.).
- Steam gas electric station with the power 42 MW
In SGU the binary thermodynamic cycle is realized. The unit consists of two main parts: GTU on the base of gas turbine engine MS5002E and SGU, which were manufactured by “REP Holding”.
- Steam gas electric station with power 84 MW (SGP-84)
The steam gas plant includes the equipment of gas loop (two gas turbines MS5002E) and the equipment of the steam loop (one steam turbine). The main equipment of the plant has the maximum unification and packaging arrangement of the module units.
Power and electrical equipment of REP Holding is supplied for the projects of major energy and power generating companies, enterprises of the nuclear industry, fuel and energy complex and integrated power grid. Among the key customers there are OAO “OGK-2”, OAO “Rosenergoatom”, OAO “FSK UES», OOO “Gazprom energoholding”, OAO “Inter RAO UES” etc...
“REP Holding” designs, manufactures and package-supplies the power-generating and electrical equipment for the energy sector companies and for the power supply grid, for the nuclear sector and for the generating companies. The package solutions for the energy sector includes manufacturing and supplying of the package transformer substations of various design rated to 6/10/20/35 kV., modular mobile substations rated to 35 - 110 kV., the automated control systems. For the power-generating objects “REP Holding” takes over designing and manufacturing of the “turnkey” power plants (gas-turbine power plants) and the thermal power plants (TPP) with the various unit capacities based on the gas turbine and the combined cycle power plants. Also the Holding companies manufactures and package supplies the diesel and block-box gas engine power plants for the low power generating objects.